SN-SG-OX186-Elevator Two Way Lift Overspeed Governor Villa For Elevator Parts
Can meet the use of conventional machineroomless passenger elevator, the product structure is similar to the SN-SG-OX187 speed limiter, only assembly is compact, space is smaller size, the row can match the linkage protection, safety gear for gradual downward with synchronous motor brake connection is used,which can realize remote electrical control detection and the reset action.
Mainly for the villa elevator decorate a form to use.
Base Plate:The speed limiter adopts G04 plate type installed base.
Gover the specifications(Rated speed):≤0.63m/s
Suitable location:Capsules side on the heavy side
Technical parameters:Rope wheel diameter Ф200mm
Speed limit wire rope:Ф6mm
| Rated speed: | ≤0.63 m/s |
| Rope wheel diameter: | Ф200 mm |
| Speed limit wire rope: | Ф6mm |
 |
SN-SG-OX187-Two Way Governor Machine Roomless Rope wheel diameter:Ф240mm, Ф200mm(only applicable when V≤1.0m/s or less)
On the product line can match the linkage protection, safety gear for gradual downward with synchronous motor brake connection is used, such as have two-way detection elevator running speed, two-way signal output function, test action and reset to realize remote electrical control.
Can meet the ues of conventional machineroomless passenger and cargo elevator.
| Rated speed: | ≤0.63m/s 0.75m/s 1.0m/s 1.5~1.6m/s 1.75m/s |
| Suitable location: | Capsules side on the heavy side |
| Rope wheel diameter: | Ф240mm, Ф200mm(only applicable when V≤1.0m/s or less) |
| Speed limit wire rope: | Standard Ф6mm, Fittings Selection Ф8mm |
| Electric connection: | Test action switch XS1-28 must provide DC24V or AC220v power(specific according to the requirements of the electromagnet model), continuous polarization time for 10 seconds or less; Speed limit action XS1-23 of switch wiring connection safety circuit, the coil should be provided to provide DC24V or AC220V power(depending on the demands of switch voltage)(you may refer to connection form above) |
 |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Product Tags:
|
|
OX-187 Bi-Directional Overspeed Governer For Elevator Components Elevator Speed Governor Rope Governor Images
|
